PDA

View Full Version : Miscellaneous C652 Fuser rebuild


Custom Search


Frustrated inc
02-04-2015, 01:23 PM
C652 / C452 Fusers are really Expensive, Are they Difficult to Rebuild and is there any Manuals on how to do it ?

CompyTech
02-04-2015, 10:10 PM
C652 / C452 Fusers are really Expensive, Are they Difficult to Rebuild and is there any Manuals on how to do it ?

Yes they are. Don't know, there isn't one that I know of. If you can find parts, good luck, as these are technically non serviceable.. If the fuser has not reached EOL, and has failed, you should be able to warranty thru KMBS. Other wise try Hytec.

Frustrated inc
02-06-2015, 11:40 AM
Thank you very Much , I thought this was the case ,

emujo
02-06-2015, 01:23 PM
There are a few drive gears available through KM, but that's it. From a service point of view, the change to replacement parts versus serviceable parts is a good thing, shaves a lot of time of the call, but it does get expensive...Emujo

Discount Printing Service
02-23-2019, 06:21 AM
I just rebuilt a fuser for a c652, took about 2 hours first time but the next one I can probably do in about an hour. Copylite sells both fuser rollers.

copier tech
02-23-2019, 12:43 PM
C652 / C452 Fusers are really Expensive, Are they Difficult to Rebuild and is there any Manuals on how to do it ?


They are expensive but when they are good for around 600k They have earned their money!

Most of mine only have one fuser before we upgrade/scrap the machine.

Custom Search