View Full Version : Miscellaneous Skews
Frustrated inc
02-04-2015, 03:38 PM
We have a customer with a C35 ( NEC my office C350 ) Draw # 3 always skews Prints and Copy's , I replaced The whole Unit and still have problem , Please help. Thank you
blackcat4866
02-05-2015, 01:00 AM
If you do a little searching amongst the threads I think you'll find a thread talking about using shims to raise one side or the other, between the paper feed accessory and the base machine. I remember reading about it. =^..^=
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.