Minolta DI-450 Error C1330

[Jack]

Have a Minolta DI-450 with error code c-1330 on display. Does anyone any suggestions as to what is causing the problem.
Thank You
Jack

[Raymondd]

Jack,
Did you open and close the front door and turn copier off/on?

[chuckt528]

Reset, as Jack said. If problem comes back at least 3 times check/replace main or print control board

[chuckt528]

If recurring, main or image process boards.

[ni311]

C1330
VD signal error
A LOW VD signal is not detected even after the lapse
of 60 sec. after an IDREQ signal has been output.

[Jack]

Thank all for this info. I unpluged all the conection on the A Board then repluged them and it works great.
Thank You All Much
Jack