View Full Version : BizHub C35
Cookr
02-13-2015, 02:06 PM
Working on customers BH C35 and they are getting a line down the page ONLY on copies and ONLY from the ADF copies just fine from glass and prints just fine also when you make a B&W copy its leaves a black line and if you make a color copy it leaves a magenta line. I have checked all the IU they look fine and also swapped out the belt with a used one and it did the same thing exact same spot, I have cleaned the glass and the slip also the laser lens under the IU's. Any Ideas? Thanks
Cookr
02-13-2015, 02:15 PM
Here is a Photo of it
28002
Zeldaman
02-13-2015, 02:20 PM
Hi there!
100% dust/dirt on the scanner. You have to open it (see service-manual) and clean it carefully.
Greetings...
Cookr
02-13-2015, 02:24 PM
Hi there!
100% dust/dirt on the scanner. You have to open it (see service-manual) and clean it carefully.
Greetings...
OK. I'll give that a try but wouldn't affect it when I make a copy off the glass?
Zeldaman
02-13-2015, 02:26 PM
Hi there!
Nope, only via DF.
Greetings...
allan
02-13-2015, 04:32 PM
I will second that, Its on your slit glass or optics. Cleaning will fix this.
Cookr
02-13-2015, 07:04 PM
That was it thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.