PDA

View Full Version : Miscellaneous 224e adf incorrect paper size


Custom Search


splblazer91
02-14-2015, 04:19 AM
I have a 224e that wont consistently recognize letter paper in the doc feed. sometimes it says 8.5x5.5 and sometimes it says a4 or b5 paper. I tried adjusting the original tray width but that didnt help. Update FW and that was a no go as well. Anyone seen this? im thinkig the resistor is bad because if i just bare touch the side guides on the DF it will change sizes on me again.

allan
02-14-2015, 04:41 AM
Check it could be the length sensor. Table in service mode and do the sensor check. Could be a bad potentiometer, strip and reassemble.

Sound fun.

Custom Search