PC 407 on OCE4222 jams at 1st turn on/copy

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mikl
    Technician
    • Nov 2011
    • 15
    #1

    [Jamming] PC 407 on OCE4222 jams at 1st turn on/copy

    Have tried 2 different 407s on this machine both act the same. tray 3 feeds,gets to 2 black rollers,stalls and make noise and jams. 1302 I think . Works now. Reboot and it works. TIA
    Tags: None
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5445
      #2
      Re: PC 407 on OCE4222 jams at 1st turn on/copy

      Are you running plain stock. That is from the feed unit. Clean or replace rollers and clutches.
      Whatever

        Comment

        • Mikl
          Technician
          • Nov 2011
          • 15
          #3
          Re: PC 407 on OCE4222 jams at 1st turn on/copy

          Originally posted by allan
          Are you running plain stock. That is from the feed unit. Clean or replace rollers and clutches.
          yes plain 20# paper. I have switched PC407 from another machine with same results. Tray 3 acts the same with different base?

            Comment

            • Mikl
              Technician
              • Nov 2011
              • 15
              #4
              Re: PC 407 on OCE4222 jams at 1st turn on/copy

              Originally posted by Mikl
              yes plain 20# paper. I have switched PC407 from another machine with same results. Tray 3 acts the same with different base?
              we had put 420 print control pwb in it. looked same. put 421 in and ok now. ; )

                Comment

                Previous template Next
                Working...