PDA

View Full Version : Guide Plates Bizhub C220/280/360


Custom Search


leonardob
03-09-2015, 01:51 PM
I've changed several times the Guide plates from Tray1 and Tray 2 , these seems to be fragile and break often .

After some research on the Net found 4 part #'s for "Guide Plate Reinforcement Braces " ( A0ED-5691-00; A0ED-5791-00; A0ED-5692-00; A0ED-5792-00) as these parts are not listed on the Original parts manual , I'm assuming that these are a part of a later Service Bulletin and solve the issue with the guide plates.

We have a good quantity of these machines on the filed and I'm planing to update all of them with these parts (reinforcements) . can anyone confirm that my above assumptions are correct ?

Tks,

Leonardo

allan
03-09-2015, 01:54 PM
Yes the original guides would break very easily. The reinforcement part is a mod. its grey in color and goes in between the guide and the plastic tab. Need left and right hand.

Allan

allan
03-09-2015, 02:34 PM
your part numbers checks out ok.

Custom Search