PDA

View Full Version : Setting Powder Help


Custom Search


captkirk
05-10-2008, 04:32 PM
I have left my setting powder at the office. I need to change drums on Konica Minolta c500 pro. Has anyone ever used anything else?

Scareit
05-10-2008, 04:35 PM
You can use Toner

blackcat4866
05-10-2008, 04:42 PM
Only in the last few years have I stopped using toner, and started using the manufacturers setting powder. Sharp was very emphatic about using the Titanium Sterate setting powder on the transfer belts. The reasoning was that other types of setting powder somehow stick to the belt leaving image voids.

Personally, 99% of the time toner should be fine.

=^..^=

ni311
05-10-2008, 05:37 PM
Toner is just fine, I am using it for years, never got problems with it.

captkirk
05-10-2008, 07:02 PM
Thanks I have used toner in the past as well, but did not want to damage new drums. Always nice to have more than one opinion.

Tonerbomb
05-10-2008, 08:46 PM
On the color boxes always use Yellow toner. It's the least visable if something goes wrong.

fixthecopier
05-11-2008, 12:44 AM
Toner never fails. I quit using setting powder after having to explain the tiny ziplock with white powder while getting searched before going into a prison.

Custom Search