View Full Version : Konica C353 Imaging units work in Develop Ineo+ 353?
jonbonse
03-19-2015, 05:58 PM
Hi all
Can anyone tell me if Konica C353 Imaging units work in the Develop Ineo+ 353?
They are the same machine with different badges.....
I know the fuser works. . . .
Thanks
copyman
03-19-2015, 06:42 PM
It might work. If not you will need to change the chip.
habik
03-20-2015, 10:51 PM
Nope! Chips are different, just a silly digit.
Sent from my iDon't believe in marketing device using Tapatalk
JR2ALTA
03-21-2015, 02:38 AM
If you have access to the drum life firmware you don't need a new chip. Just swap old chip to new drum. The gas gauge won't clear but it also wont prompt for replacement with said firmware.
groovy
03-21-2015, 12:18 PM
Tried a month ago a Develop Imaging unit in a c353 and it works without problem at all, like a konica minolta. I think those imaging units are all the same.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.