View Full Version : after change Fuser Unit still have error (bizhub C450)
irakli3443
03-20-2015, 06:43 PM
one month ago have been error c3852.
then i checked Fuser unit and saw ribbon was demaged. then on ebay.com I bought used fuser unit and changed it by instruction.
after switching, still showing error.
can samebody help. maybe it's need resset or need change same like chip.
thank you
manuelcorrea
03-20-2015, 06:53 PM
It has to be a new fusing unit or change the fuse
irakli3443
03-20-2015, 07:07 PM
It has to be a new fusing unit or change the fuse
How change the fuse? have you links about any instruction?
JR2ALTA
03-20-2015, 07:28 PM
you don't need a fuse unless it was calling for a new fuser in addition to the code.
but you do need to 'reset' the machine since fuser codes cannot be cleared easily for safety reasons.
PM me for instuctions
allan
03-20-2015, 08:41 PM
Power supply? Did you reset the trouble condition? Just changing the fuser would still cgive the sam code if it was not reset.
irakli3443
03-20-2015, 09:12 PM
you don't need a fuse unless it was calling for a new fuser in addition to the code.
but you do need to 'reset' the machine since fuser codes cannot be cleared easily for safety reasons.
PM me for instuctions
Power supply? Did you reset the trouble condition? Just changing the fuser would still cgive the sam code if it was not reset.
how reset troumble condition?
allan
03-21-2015, 01:00 AM
how reset troumble condition?
switch on machine while holding down the utility button, wait for trouble reset to pop up. touch that and restart machine.
irakli3443
03-21-2015, 10:21 PM
i did it. now working. thank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.