PDA

View Full Version : Miscellaneous Konica Minolta C452 C225B error code


Custom Search


mearmi
03-27-2015, 12:33 AM
We are getting a code C225B in Konica Minolta C452. After reset it works for couple of days and reappears.

We have noticed one thing whenever this code appears there is misfed in Exit Drive Assembly.

Exit assembly can cause this problem?

Please advise.

Thanks

Mearmi

allan
03-27-2015, 12:50 AM
I dont have the manual with me now, but its probable an IU thats stiff or stuck. remove all the unit and try to turn them by hand. It could even be toner transport problem. the jam is a result of that.

scottybbb
03-27-2015, 12:58 AM
Had a C451 doing this when first powering on or coming out of sleep mode.Would always re-set.Swapped DCPU from another C451.Have not heard back.

Custom Search