PDA

View Full Version : C351 - bypassing the IC-402


Custom Search


bicouncz
04-01-2015, 08:40 AM
Hi everyone

I would to ask some question.

We have KM C351 with EFI Fiery controller IC-402.

In IC-402 HDD will go to hell.
My idea is disconnect the IC-402 and plug the C351 to the network directly.
But if i unpluged main cable from IC, on main display in KM show "Power ON the Controler".
In the main menu on KM doesnīt config the TCP/IP network
So. This is the firmware problem i think, itīs true?
I have not login credential to KM bussines site.
Itīs possible send me the correct firmware for my printer?
Thank you for any idea and sorry for my bad English :-):confused:



ROM Version


MFP Controller BOOT Program
4037-1E00-G00-05-000(00)


MFP Controller SubSet Program
4037-1F00-G00-21-000(00)


MFP Controller
4037-0100-G00-D6-000(00)


Operation PANEL Message Data
4037-8100-G00-C5-000(00)


FAX Board Controller1



FAX Board Controller2



IR
4037-0023-G00-15-000


PRT
4037-0050-G10-28-000


LPH
4037-0053-G01-00-000


ADF
4582-24G0-08-00


Finisher



System Controller
4037-1000-G00-D6-000(00)


Printer Controller



Printer Controller-Font



Printer Controller-Demo Page
4037-3E00-G00-00-000


MIO
4037-5000-G00-47-000(00)


PSWC
4037-5100-G00-89-000(00)


MIB IF
4037-5200-G00-44-000(00)


IPP IF
4037-5300-G00-04-000(00)


External Controller IF
4037-6100-G00-44-000(00)


TCP/Socket
4037-6300-G00-15-000(00)


Open API
4037-7000-G00-86-000(00)


Operation PANEL
4037-8000-G00-C6-000(00)


CSRC
4037-8300-G00-67-000(00)


PIC
4037-8200-G00-16-000

EarthKmTech
04-01-2015, 09:11 AM
If you want to remove and throw away the firey this is not a problem, you just need to change the controller number in service mode back the internal number - which I do not remember. It is is in the service manual, which i do not have for these anymore. Someone else will chime in shortly I'm sure. It is really not a big deal and not a firmware issue.

bicouncz
04-01-2015, 01:22 PM
Thank you EarthKmTech.

I made it!

1) Go to service menu Stop-0-0-Stop-0-1
2) Service2 - Controller Unit - 0 Controler Unit (turn off controler)
3) Reboot
4) Done!

All function in administration menu(eq. TCP/IP setting and soo on) is back.

Do not know if itīs possible Czech translation for main menu? We have english only...

Custom Search