View Full Version : EP2120 Imaging unit fuse
Does any one know the value of the fuse to reset the Imaging Unit counter on the EP2120 model?
Thanks.
Why do you want to replace the fuse , if all you have to do is take out the toner bottle and short out pins 4&6 on pj3 on pwb a remember the mach must be off when you make the connection then switch it on while creating the short as soon as the mach starts to run or within about 5 sec break the short again.
nmfaxman
05-14-2008, 03:34 PM
Precision Roller PN m9970. $5.50
I wanted to know if the EP2120 Imaging Unit fuse is the same as the fuse in the bizhub C450 fixing unit. Katun sells them $17.35/bag of 20. Thanks.
Mark B
05-15-2008, 01:33 PM
It is a Picko fuse I do not think there is a value.
cobiray
05-15-2008, 06:06 PM
The Katun p/n was 35010515. We had ordered a ton back in the day for some reason. Not sure of the new p/n if it might have changed with the merger.
Accentcp
05-28-2008, 08:50 PM
1/16 Amp pico fuse
FYI, the fuse Katun sells for rebuilding the EP2120 Imaging unit is the same as the fuse to reset the count on the Bizhub C450. Thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.