PDA

View Full Version : CQ konica 7235 F26-3 F26-1


Custom Search


1stcavvet
04-09-2015, 02:55 AM
Got those 2 codes after I changed the blade and the developer, ran L-detect, turn off then back on and came up with the F26-3 code Checked C-7 on the DC power , and turned on toner auto supply. turned off and then on, Came up with F26-1. What am I missing here or do I have a failure somewhere else? THANKS Any ideas on a remedy would be greatly appreciated.

CraigW
04-09-2015, 05:03 PM
26-3, mark position of the white gear on the sleeve section of developing unit....put it back and power.

Remove and see if the mark moved from were it was.

1stcavvet
04-13-2015, 12:48 PM
Is there a way to start over, to initilize the DV in this machine.

Custom Search