jojolucky
05-14-2008, 12:37 PM
S4010DS2 datasheet and PDF (http://www.chinaicmart.com/series-S40/S4010DS2.html) check from http://www.chinaicmart.com/series-S40/S4010DS2.html
(http://www.chinaicmart.com/series-S40/S4010DS2.html)S4010DS2 General Description
The Teccor line of sensitive SCR semiconductors are half-wave unidirectional, gate-controlled rectifiers (SCR-thyristor) which
complement Teccor's line of power SCRs. This group of packages offers ratings of 0.8 A to 10 A, and 200 V to 600 V with gate sensitivities of 12 µA to 500 µA. For gate currents in the 10 mA to 50 mA ranges, see SCRs section of this catalog. The TO-220 and TO-92 are electrically isolated where the case or tab is internally isolated to allow the use of low-cost assembly and convenient packaging techniques. Teccor's line of SCRs features glass-passivated junctions to ensure long-term device reliability and parameter stability
Teccor's glass offers a rugged, reliable barrier against junction contamination. Tape-and-reel packaging is available for the TO-92 package. Consult the factory for more information. Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for more information.
Features
Electrically-isolated TO-220 package
High voltage capability up to 600 V
High surge capability up to 100 A
Glass-passivated chip
Compak Features
Surface mount package 0.8 A series
New small-profile three-leaded Compak package
Four gate sensitivities available
Packaged in embossed carrier tape with 2,500 devices per reel
Can replace SOT-223
(http://www.chinaicmart.com/series-S40/S4010DS2.html)S4010DS2 General Description
The Teccor line of sensitive SCR semiconductors are half-wave unidirectional, gate-controlled rectifiers (SCR-thyristor) which
complement Teccor's line of power SCRs. This group of packages offers ratings of 0.8 A to 10 A, and 200 V to 600 V with gate sensitivities of 12 µA to 500 µA. For gate currents in the 10 mA to 50 mA ranges, see SCRs section of this catalog. The TO-220 and TO-92 are electrically isolated where the case or tab is internally isolated to allow the use of low-cost assembly and convenient packaging techniques. Teccor's line of SCRs features glass-passivated junctions to ensure long-term device reliability and parameter stability
Teccor's glass offers a rugged, reliable barrier against junction contamination. Tape-and-reel packaging is available for the TO-92 package. Consult the factory for more information. Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for more information.
Features
Electrically-isolated TO-220 package
High voltage capability up to 600 V
High surge capability up to 100 A
Glass-passivated chip
Compak Features
Surface mount package 0.8 A series
New small-profile three-leaded Compak package
Four gate sensitivities available
Packaged in embossed carrier tape with 2,500 devices per reel
Can replace SOT-223