oce 3165 w/m6106 code

[T911]

can i just replace the main motor on this one or do i have to reset it after doing so. thanks t

[leo]

you have to reset the error in servicemode "31"
are you sure it is the mainmotor?

[djq2]

have u ckd t ntc in t ttf unit????
also heater lamps

[mecanico]

can i just replace the main motor on this one or do i have to reset it after doing so. thanks t

If the problem was at the main motor, then you must rearm the clixon (thermal fuse) in the TTF.