PDA

View Full Version : Miscellaneous Bizhub C452 Fiery removed


Custom Search


Cookr
04-27-2015, 09:52 PM
OK this is probably an easy question but I cant seem to figure it out. I removed a E10-01 Fiery from a C452 and now it keeps saying to "power on controller". I am hoping its just something that needs to be turned off but I have been looking and don't see anything noticeable but I am probably just looking right over it but any help would be appreciated. Thanks :confused:

allan
04-27-2015, 10:02 PM
You need to switch back to the on-board controller.

Goto -> sercive mode -> system 2 -> on-board controller setting -> set controller 0.

Custom Search