PDA

View Full Version : Error Code Bizhub C451 - many warning codes - copier not operational


Custom Search


thendral
05-09-2015, 02:58 PM
Hello All,

One of my customer has Konica Minolta bizhub C451 - displaying bunch of warning messages:

http://s11.postimg.org/wkof0i8jz/20150508_223719.jpg (http://postimg.org/image/wkof0i8jz/)

http://s11.postimg.org/azjccwbtb/20150508_224056.jpg (http://postimg.org/image/azjccwbtb/)

The following notification message is being displayed.

<<Page 1>>

Cannot Scan
Tray 1 cannot be used currently.
Tray 2 cannot be used currently.
Tray 3 cannot be used currently.
Tray 4 cannot be used currently.
LCT cannot be used currently.
Bypass Tray cannot be used currently.

<<Page 2>>
Hole Punch cannot be used currently.
Staple cannot be used currently.
Unable to Half-Fold/Center Staple-Fold/Tri-Fold
Z-Fold cannot be used currently.
Post Inserter cannot be used at this time.

I checked all the connections to ADF, all the electrical connections to sorter and other trays.
Being Ricoh tech, I not sure if any settings I am missing.

Any help in this regard is highly appreciated.

Thanks
Thendral

thendral
05-09-2015, 03:01 PM
Oh Sorry forgot mention, it is not recognizing the Fiery controller either. It is not showing up in the utilities screen.

allan
05-09-2015, 04:43 PM
go check trouble isolation maybe you can unlatch them. if not i think the OACB it wacky. Or a missing voltage from the supply.

KingofMorton
05-09-2015, 06:45 PM
Go to System 1, problem isolation, make sure they are all on set. Power cycle the machine and see what happens. You may have to "unset" them, power cycle, the "set" them again and power cycle.

thendral
05-10-2015, 03:52 AM
Go to System 1, problem isolation, make sure they are all on set. Power cycle the machine and see what happens. You may have to "unset" them, power cycle, the "set" them again and power cycle.

Thanks a lot KingofMorton. I did set and unset then the message disappeared.

Thanks a lot.

Not really sure what happened. But any way got it up and running.

Regards
Thendral

Custom Search