PDA

View Full Version : Bizhub 282 - booklet fold without stapling?


Custom Search


Latitude42
05-14-2015, 03:39 PM
I just updated my Bizhub 282 driver for Windows to version 1.3 VXL. The printer has the optional folding and stapling finisher. When I try to set up a profile for booklet finishing, I see a choice for "fold and staple" but not just "fold" without stapling. Fold-and-staple does work properly, but some of the time I want to fold without stapling. Is there anything I can do?

emujo
05-18-2015, 05:22 PM
Universal driver gives the same options, were the 2 functions available separately on the older driver? This might be an inherent function of the saddle stitcher. If you can fold w/o stapling from the copier then the driver should support the same function. Emujo

Latitude42
05-18-2015, 08:44 PM
I will check this (i.e., whether the old driver offered folding without stapling). I have another PC that has the old driver still installed.

Custom Search