View Full Version : Biz Hub 950
antone
05-16-2015, 09:25 PM
Message warming up...comes ready copys and intermittently smudges copies with toner rubbing off.
allan
05-16-2015, 09:33 PM
So your fuser is giving trouble?
The bussings on UFR last about 3M.
blackcat4866
05-16-2015, 09:44 PM
What have you done so far? =^..^=
splblazer91
05-17-2015, 05:29 AM
Examples? Sounds like a fusing or transfer issue.
Brett GS
05-17-2015, 06:40 AM
Check the fuser lamps,ive had the same issue and the thicker of the two upper roller lamps was blown and didnt give a code,it just took forever to warmup and the first copies/prints didnt fuse.
minimerlin
05-17-2015, 10:21 AM
Check the fuser lamps,ive had the same issue and the thicker of the two upper roller lamps was blown and didnt give a code,it just took forever to warmup and the first copies/prints didnt fuse.I agree..you have a failed fuser lamp!
tulintron
05-18-2015, 02:28 PM
I agree..you have a failed fuser lamp!
if the fuser lamps light up, can be power supply.
splblazer91
05-18-2015, 04:42 PM
I just had a 951 where the Lamps would light up randomly. Had to replace the PRCB and now its back to normal.
scottybbb
05-19-2015, 12:52 AM
Just replaced a lamp today for that same issue.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.