PDA

View Full Version : C452 will not copy


Custom Search


ubn4it
05-27-2015, 09:11 PM
Updated firmware. Formatted HDD. Updated movie firmware. Machine will not copy or print meter count or configuration page. Scanner moves but drive motors do not turn. Displays "stopped printing" under job list. Drive motors turn when in service mode when doing a stabilization. No codes displayed. Any idea's?

copier addict
05-27-2015, 09:41 PM
Sounds like one of the consumables has reached end of life. Press utility/counter and check consumable life.
If you know how you can go into service mode and allow the machine to operate after end of life has been reached.
Hope this helps

ubn4it
05-27-2015, 11:49 PM
I'm sure I'm missing something....It just hasn't clicked yet. I've set the bit's 51/55.?

ubn4it
05-28-2015, 12:30 AM
Up and running! Thanks for leading me back into the light!

RRodgers
05-28-2015, 03:00 AM
Up and running! Thanks for leading me back into the light!
So what was it?

Albonline
05-29-2015, 05:36 PM
machines that have pplm mod when the units reach end of life they just quit printing. no warning message. if no stop is turned on they keep going. follow directions exactly.

Custom Search