Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Brother C9130CW

  1. #1
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    642
    Rep Power
    28

    Brother C9130CW

    when printing color the color drops off and goes blank . seems one color at a time then i lose all m,c,y . i have replaced the drums and toner unit from another machine they have with no luck. If i print 5 sets of 5 pages the first set or two looks good most of the time. then color goes blank. if i do the jobs again same thing. even if i use the DF.
    Black seems to be ok.
    Thanks for your help

  2. #2
    Service Manager 5,000+ Posts
    Brother C9130CW

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,255
    Rep Power
    177

    Re: Brother C9130CW

    Quote Originally Posted by Woxner View Post
    when printing color the color drops off and goes blank . seems one color at a time then i lose all m,c,y . i have replaced the drums and toner unit from another machine they have with no luck. If i print 5 sets of 5 pages the first set or two looks good most of the time. then color goes blank. if i do the jobs again same thing. even if i use the DF.
    Black seems to be ok.
    Thanks for your help
    OEM Brother toner/drums?

    what is life on:

    drums

    toners

    belt

    fuser

    is it clean inside

    have you cleaned the corona wires?

    what have you done?

    do you have a manual?

  3. #3
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    642
    Rep Power
    28

    Re: Brother C9130CW

    all new drums. it is crap toner. i have changed them out and she has done it twice. when i put the units in her other machine its ok. i am getting a manual. its got 15 k on the machine. Machine is clean. i was thinking hv dropping off or color drive unit. i also put the other machines unit in her machine with same results and put hers in to good machine. the other works fine with hers drum and toners

  4. #4
    Service Manager 5,000+ Posts
    Brother C9130CW

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,255
    Rep Power
    177

    Re: Brother C9130CW

    Quote Originally Posted by Woxner View Post
    all new drums. it is crap toner. i have changed them out and she has done it twice. when i put the units in her other machine its ok. i am getting a manual. its got 15 k on the machine. Machine is clean. i was thinking hv dropping off or color drive unit. i also put the other machines unit in her machine with same results and put hers in to good machine. the other works fine with hers drum and toners
    double check internal charge rollers iin ITB.. sounds like they may not be moving or belt is not locked down.

  5. #5
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,333
    Rep Power
    105

    Re: Brother C9130CW

    I'm leaning towards High-voltage Power Supply PCB ASSY. Unfortunatelly it looks like a PITA to test with their another MFC, basically doing the job 2 times.
    Just PM me if you need any documentation or FW.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  6. #6
    Service Manager 1,000+ Posts
    Brother C9130CW


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    2,345
    Rep Power
    82

    Re: Brother C9130CW

    Quote Originally Posted by Woxner View Post
    when printing color the color drops off and goes blank . seems one color at a time then i lose all m,c,y . i have replaced the drums and toner unit from another machine they have with no luck. If i print 5 sets of 5 pages the first set or two looks good most of the time. then color goes blank. if i do the jobs again same thing. even if i use the DF.
    Black seems to be ok.
    Thanks for your help
    hey wox, i had this once (fortunatley don't work on many brothers) I also suspected the HVPS. Like tsb said it looked like a PIA so ended up replacing the machine. Sorry I couldn't offer more help.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here