Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jan 2024
    Location
    BRUTTISELLEN
    Posts
    3
    Rep Power
    0

    Brother HL3140 one color misaligned by 3mm

    Hello,
    I have a Brother HL3140CW in wich the yellow color prints shifted 3mm to the right.
    The auto alignment fails to complette and the manual alignment procedure is not enough to correct 3mm.
    Mechanically everything seems to be ok.
    Already tried to swap the magenta and yellow units and then the misaligned color is the magenta. This indicates the problem is not with the yellow color unit but something in the printer.

    Any idea on what else to check?

    Regards.

  2. #2
    Senior Tech 100+ Posts emiliorsg's Avatar
    Join Date
    Jul 2018
    Location
    Valencia
    Posts
    137
    Rep Power
    16

    Re: Brother HL3140 one color misaligned by 3mm

    Change the consumables for originals and perform calibration and color registration.

  3. #3
    Junior Member
    Join Date
    Jan 2024
    Location
    BRUTTISELLEN
    Posts
    3
    Rep Power
    0

    Re: Brother HL3140 one color misaligned by 3mm

    Consumables are new and original.
    I think I have solved the issue by doing the manual registration several times.
    It will only alow to modify the alignment by +/-12 units (?), but I found out if you repeat it several times you can acctually correct a big misaligment.
    After I got close enough the autoregistration worked without error.
    Im wondering how it became so misaligned...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here