Thanks:
0
Likes:
0
Dislikes:
0
-
Yeah, just reset the toner detection lever - it's a white thingy located at one side of the cartridge. You'll need to turn the dev-roller backwards while forcing the lever a bit so it moves about 45 degrees.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: Brother HL-2040
If resetting doesn't help then sometimes the toner is the problem.
Did you replace it with a generic or oem toner?
Sometimes generic toner causes this problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks