6 years using daily a Milwaukee m12 driver. Same battery. An excelent choice.
6 years using daily a Milwaukee m12 driver. Same battery. An excelent choice.
ryobi used to have a 4v (tek 4 hp53l) driver with torque limit adjustment(but then you didnt have to)... long been discontinued because too many ppl were using that for cabinet work... *face palm.
it was perfect for this trade.
now I use 12v dewalt screw driver, but then you have to keep the torque lower then 5 to prevent stripping.
Idling colour developers are not healthy developers.
This original post is from 2015. There is a newer post where this is discussed. I posted this Panasonic screwdriver I've used for years (see attached). Light, balanced & batt last a month. I added a dewalt magnetic bit holder with #2 jap screw bit.
Надо об этом подумать
Not much need for a power screwdriver now.I can do a pm on most machines without using a manual screwdriver. I do need a screwdriver to pry the panels off thou.Alot has changed over the years.I speed more time delivering toner and doing phone support than I do repairing machines.
Bookmarks