Hi again! Is it possible scanner vibration to be from scanner motor, it's not from the rail or belt.
Hi again! Is it possible scanner vibration to be from scanner motor, it's not from the rail or belt.
Hi have a look at the pdf the spring under the scanner has been improved FE3-3696-010
blurred image.pdf
I know this digital scan once print many should result in all copies looking the same.
I once had a Toshiba Estudio where the first copy looked good but all copies after on runs were blurred, a leaf spring in the scanner was out of alignment.
Last edited by skynet; 07-11-2016 at 08:36 PM.
When you think you have made a procedure idiot proof your company employs a better idiot.
Thanks very much. I had not thought about it.
Hi! The problem it's not from the springs. Its strat blurred the copies again. I think it is from step mottor. I was trying everything but doesn't help.
Ok, so you scan 1 original, copy it 50 times, it's ok
you scan another (or the same) original and copy it 50 times, it's ok.
you scan another (or the same) original and copy it 50 times, it's ok.
only the 4th time you scan an original it comes out blurred... ?
Do all 50 copy's of the 4th scan come out blurred ?
yes -> 4th scan is not ok -> problem in scanner
no -> problem printing after appox. 150-200 sheets -> problem in printer
Johan
Thanks for replay.Yes - all 50 copies are blurred. Generated something like vibration when the scanner moves, the scanner motor cost 300 $ and I am not completely sure its from him. I was tried almost everything like i said before. thanks again!
It only seems to ahppen after multiple scans, how much time inbetween the scans ? And howlong before you can scan normaly again ? Trying to figure out if it might be heat or something like that,...
Johan
Bookmarks