imagePRESS C1 - E025-0403 error code !

[netugur]

Hi, my problem is; When I open the machine I see error E025-0403. I looked at the topics in the forum. But I could not solve the problem. I saw something like this; When I pull out the cable to the FK2-0575-000 motor, the machine starts to work. It works normally until auto gradation is written and it gives error E078. If the engine is connected to the cable, the machine immediately switches to E025-0403. I checked all the wires in the front. I checked all the motors, cables, sensors in the hopper unit. I checked the cables with the multimeter up to the sockets. I did not find any problems. I made the DC controller clear operation via service mode.


Please help your friends know. Thank you.

[wcanonw]

Hi, my problem is; When I open the machine I see error E025-0403. I looked at the topics in the forum. But I could not solve the problem. I saw something like this; When I pull out the cable to the FK2-0575-000 motor, the machine starts to work. It works normally until auto gradation is written and it gives error E078. If the engine is connected to the cable, the machine immediately switches to E025-0403. I checked all the wires in the front. I checked all the motors, cables, sensors in the hopper unit. I checked the cables with the multimeter up to the sockets. I did not find any problems. I made the DC controller clear operation via service mode.


Please help your friends know. Thank you.

hello good morning friend how did you solve that problem, I have an equal problem, check the black hopper motor cables that are going to
Side-drive PCB and DC controller PCB



POWER CORD TERMINAL ASSEMBLY.
DC POWER SUPPLY ASSEMBLY.
DC CONTROLLER PCB ASSEMBLY.
MAIN CONTROLLER PCB ASS'Y. and these parts more

[Phil B.]

hello good morning friend how did you solve that problem, I have an equal problem, check the black hopper motor cables that are going to
Side-drive PCB and DC controller PCB
POWER CORD TERMINAL ASSEMBLY.
DC POWER SUPPLY ASSEMBLY.
DC CONTROLLER PCB ASSEMBLY.
MAIN CONTROLLER PCB ASS'Y. and these parts more

2years no reply to his Q.....

doubt he did

or

if he did he never came back to update.

might want to start your own new thread.

[wcanonw]

2years no reply to his Q.....

doubt he did

or

if he did he never came back to update.

might want to start your own new thread.

thanks

[wcanonw]

problem solved....

[zoraldinho]

Can you share?

[wcanonw]

[QUOTE = zoraldinho; 1029441] ¿Puede compartir? [/ QUOTE]
hello canon c1, in addition to presenting error E025-0403, there were times when error E0015-0001 was presented.
More than a year ago (the DADF-R1 and the optional unit-s1 power supply) were uninstalled from the printer.

[wcanonw]

it was changed (buffer decurrer assembly and unit-s1 power supply). The problem persists ERROR E025-0403 and E0015-0001

[wcanonw]

the optional power supply unit-s1 of the DADF-R1 was installed, the machine was turned on, now another error code E021-0001 came out

[wcanonw]

Rotary motor unit is hardened and the rear driver pcb assembly has burnt components.
The change of the rotary motor unit and the rear driver pcb assembly .
The Canon imagepress C1 printer is printing normally.
problem solved