Results 1 to 8 of 8

Thread: iRADV4035

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    193
    Rep Power
    24

    iRADV4035

    Hi guys

    I have 2 units iradv4035 problem the panel display is like freezing and hang no respond. Everything is like normal the machine can boot up and ready to copy. But when you press the numeric keypad sometimes it will slow respond or it wil no respond at all. Even you press the display LCD for any function its also same problem.

    We have swap HDD, Main Con 1, whole panel assembly display but is still the same. Anyone can enlighten me what else to check. Thank you

  2. #2
    Service Manager donking289's Avatar
    Join Date
    Mar 2017
    Location
    Morristown, TN
    Posts
    22
    Rep Power
    7

    Re: iRADV4035

    Usually the Control Panel CPU board, though you have swapped the whole unit. Be sure to disconnect and then reconnect all connectors on Main Con 1 and Main Con 2.

  3. #3
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,603
    Rep Power
    50

    Re: iRADV4035

    I see this on IRA 4200,5200,2200,etc series. Never on IRA 4000,5000,etc. Is it a 4035 0r 4235? And yes..it is control panel cpu pcb that fixes it. Canon has modified the boards...new part numbers. I also had a 4025 doing similar. It was main con2...telltale sign was it would not let me flash the HDD. I have also had on 5200 series freezing up...tried all of the above...fix was to press test button on circuit breaker, reset breaker a few times. Never did it again. There is a USA Canon bulletin about it I believe

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    193
    Rep Power
    24

    Re: iRADV4035

    Quote Originally Posted by donking289 View Post
    Usually the Control Panel CPU board, though you have swapped the whole unit. Be sure to disconnect and then reconnect all connectors on Main Con 1 and Main Con 2.

    Thank you for enlighten me. I swap again with another panel assembly from another machine(3rd unit machine) and it works. I have order the parts for panel CPU p.c.b.

    I think I have 2 units with defective panel CPU p.c.b

  5. #5
    Field Supervisor 500+ Posts dan7777's Avatar
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    681
    Rep Power
    27

    Re: iRADV4035

    Quote Originally Posted by Blues Guy View Post
    Thank you for enlighten me. I swap again with another panel assembly from another machine(3rd unit machine) and it works. I have order the parts for panel CPU p.c.b.

    I think I have 2 units with defective panel CPU p.c.b

    This seems to be the fix for the advanced series. The CPU board is a lot cheaper than a control panel. I ordered a control panel for a 2030 because it was slow or would freeze. Six months later same thing. By then we had figured out it was the CPU and the new control panel had the old style CPU in it.

  6. #6
    Junior Member
    Join Date
    Mar 2020
    Location
    Bhopal
    Posts
    1
    Rep Power
    0

    Re: iRADV4035

    I have issue with my same copier canon ir adv 4035, after clearing all thing i.e. hdd, ram etc.
    my service menu display screen get shorten. please guide me to restore the size of service menu.
    pics are attached.WhatsApp Image 2020-06-18 at 11.14.05 AM.jpgWhatsApp Image 2020-06-18 at 11.14.05 AM (1).jpg
    Attached Images Attached Images

  7. #7
    Junior Member
    Join Date
    Jun 2020
    Location
    kurunegala
    Posts
    9
    Rep Power
    0

    Re: iRADV4035

    Ir adv 4045
    Anyone know what caused this? When i cleaned developer magnet sleeve roller it only make 20or less copies. After that it becomes like first picture

    Sent from my STK-L22 using Tapatalk

  8. #8
    Service Manager 2,500+ Posts
    iRADV4035

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    4,391
    Rep Power
    89

    Re: iRADV4035

    Quote Originally Posted by thish.csoffice View Post
    Ir adv 4045
    Anyone know what caused this? When i cleaned developer magnet sleeve roller it only make 20or less copies. After that it becomes like first picture

    Sent from my STK-L22 using Tapatalk
    Start a new thread! & don't use compatible toner!
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here