hi ,
i have an iradv4225i showing 2 error codes, E280-003 and E315-0510. Ive disconnected ribbon cables from the contact sensor to the RCON and the ribbon cable to the main controller. Still the same. I dumped the RCON and re put in the values from the service label. I did a diagnostic check and all good, no faults, so was thinking of RCON OR MCON issue but after the passing of the test, i am now thinking of a ribbon cable issue. I have ordered Core Holder unit and the Cable Reader flat. Anyone else come across this? The machine goes straight into error when switching on, but works ok when printing. I also took off the dadf just to rule that out and error still occurs. Any help would be appreciated.
tks
Bookmarks