I have this printer with the code e078-0001, someone can help me, I do not have the technical manual,
if someone can indicate where to get it ... thank you very much
I have this printer with the code e078-0001, someone can help me, I do not have the technical manual,
if someone can indicate where to get it ... thank you very much
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
You should change the fixing drive unit (ref: RM1-4974-000)
hola,debe actualizar el equipo a una version nueva de firmware.Y asi se soluciona.
Just wanted to update this thread to state that updating to the latest firmware made the issue go away, as suggested above (7.10).
Thanks to "wav" who was able to help me with this.
Attention!!
A skilled technician is needed for disassembly and assembly. Ordinary personnel should pay attention to disassembly and assembly, as the drive clutch is located inside the drive gear.
After removing the cover on the right side of the machine from the front, you can see a drive clutch. The softening of the clutch release sponge caused the machine to have inaccurate calibration between the drive drum and the ITB component color block sensor, resulting in malfunction.
The method is very simple: remove the clutch, remove the softened sponge, replace it with a layer of electrical tape and install it to solve the problem.
Bookmarks