Originally Posted by
canonbundy
Hi, I've been away for a while however the fix for E027-0X00 (providing dev couplings etc are ok) is to remove the Hopper seals on not only the offending colour but the other 3 also, as they in turn will error E027-0X00.
The ADV5051 series are getting old, and as a result so too are the seals & with the pulling out/in of the Process Unit to clean/replace Drum units, the Hopper seals for the Developer Units lose their grip & over a period of time slide forward each time the Process Drawer is drawn forward until the Seal actually blocks/covers the Toner dispensing hole, which in turn deprives the Developer Unit of Toner resulting in the Error.
Remove the Process Unit, ITB Assembly & Fusing Unit (for easy access) with a good torch you will see the Seal of the offending Hopper hanging down & with a small pair of pliers grip the seal & with a backwards/forwards movement of the Toner dispensing Tube slowly (without breaking the Seal) pull the Seal towards the front of the machine - believe it or not, the Hopper does not leak excess toner & no other adjustment/settings need to be made, vacout the machine, clean Patch Detect Sensor assy & perform full Autograd.
Cost - about half an hour.
Cliff.
Bookmarks