Results 1 to 9 of 9
  1. #1
    Technician NM0174's Avatar
    Join Date
    Mar 2013
    Location
    Francistown
    Posts
    38
    Rep Power
    23

    Background on copies

    The copy comes out with a background as in the picture. Drum, dev tank and tonner are new. Please help


    Sent from my iPhone using Tapatalk

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2016
    Location
    manila
    Posts
    108
    Rep Power
    0

    Re: Background on copies

    Quote Originally Posted by NM0174 View Post
    The copy comes out with a background as in the picture. Drum, dev tank and tonner are new. Please help


    Sent from my iPhone using Tapatalk
    Is this happen when you changing new toner? if yes, you are using not genuine toner for the first time and base on my experience i used to clean the developer and remove the remaining toner and try it again to use your new toner without mixing old toner from the developer....good luck

  3. #3
    Technician NM0174's Avatar
    Join Date
    Mar 2013
    Location
    Francistown
    Posts
    38
    Rep Power
    23

    Re: Background on copies

    Quote Originally Posted by rudysemira View Post
    Is this happen when you changing new toner? if yes, you are using not genuine toner for the first time and base on my experience i used to clean the developer and remove the remaining toner and try it again to use your new toner without mixing old toner from the developer....good luck
    Thank you. Even if you take a drum and dev tank from a perfectly working machine. You still get the same copy with a background


    Sent from my iPhone using Tapatalk

  4. #4
    Field Supervisor 500+ Posts roho's Avatar
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    844
    Rep Power
    43

    Re: Background on copies

    No blanking on the prints, usually wrong charged toner, so if you can absolutely rule that out, I would be looking for a electrical problem, as there is no lead edge blanking.

  5. #5
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: Background on copies

    How does the fuser look ? if you have a spare machine, maybe you can swap and try ?
    Johan

  6. #6
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: Background on copies

    MODEL????

  7. #7
    Master Of The Obvious 10,000+ Posts
    Background on copies

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Background on copies

    Quote Originally Posted by Canuck View Post
    MODEL????
    I'm glad I wasn't the only one to notice this. It's really hard to offer specific device when when we don't know what model.

    In general yes, wrong toner can produce this exact effect. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Technician NM0174's Avatar
    Join Date
    Mar 2013
    Location
    Francistown
    Posts
    38
    Rep Power
    23

    Re: Background on copies

    Quote Originally Posted by blackcat4866 View Post
    I'm glad I wasn't the only one to notice this. It's really hard to offer specific device when when we don't know what model.

    In general yes, wrong toner can produce this exact effect. =^..^=
    Replying message from 2018Background on copiesBackground on copies
    My bad, phone got damaged during that period and I lost comms for 3 months
    This problem was on an IR2520. I eventually discovered that it was the drum unit that had a problem. Bias voltage must have been "leaking". As soon as I put the drum, blade and charge roller on a new unit, copies became 100%.



    Sent from my SM-G965U using Tapatalk

  9. #9
    Junior Member
    Join Date
    Apr 2021
    Location
    Seattle
    Posts
    1
    Rep Power
    0

    Re: Background on copies

    Double-check the toner. I think you did not put it back right. Sometimes the paint isn't of the best quality, and if it's liquid, it spills everywhere if it's powder, it goes on the toner and leaves this kind of spot and stripes. Try to print an image, anything from your stock illustrations; this might fix the printer. In general, it's recommended to have the printer filled and cleaned by a person who knows how to do it. Don't do it by yourself if you don't know-how. Trying to save up some money leads to this!
    Last edited by Cligerson; 04-30-2021 at 12:29 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here