Hi guys,
Please tell me how to put the "manually open toner door" icon on the maintenance screen trough service mode...
Thanking you in advance.
Doug
Hi guys,
Please tell me how to put the "manually open toner door" icon on the maintenance screen trough service mode...
Thanking you in advance.
Doug
Enter Service Mode and navigate to:
COPIER > OPTION > DSPLY-SW > Level 2 >< T-CRG-SW> Set to "1"
Power Cycle the imageRUNNER
Now enter Settings / Registration > Adjustment / Maintenance > Maintenance >< Replace Specified Toner >
Follow the on-screen instructions and open the main toner cover.
Select the [Replacement Needed] tab, and select [Replace. not needed] tab.
Now all the color toners will be displayed.
Select the color of the toner to open it's cover.
Now the [Remove Toner Cartridge] tab will be enabled. Select the Remove Toner Cartridge tab.
The message [The selected toner still can be used. Do you want to replace it] select YES.
* The Toner Cover will now open and the toner cartridge can be removed. Follow the on-screen instructions to install the cartridge. *
***** Do not replace toner cartridges until the message prompting you to do so appears.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
YES - Thanks for this - I have a number of IRc5560i's at an account where we need to come on site to replace toner. the procedure with a card in the upper RH corner of the door does pop it open.
On this model I needed to reboot afterwards to get the toner chip to recognize the new toner - BIG time saver when at a unit and it is down to 10%
IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications
Bookmarks