replace hdd

[vinhsesco]

Dear all.

I have canon ir 6255 damaged hdd machine. i have replaced the new hdd but no firmware update you can help me. vinhsesco@gmail.com. Thank you very much

[copier tech]

Dear all.

I have canon ir 6255 damaged hdd machine. i have replaced the new hdd but no firmware update you can help me. vinhsesco@gmail.com. Thank you very much

Firstly you need to fit the correct HDD, just any hard drive wont work.

We have the firmware on our site below.

Copier Firmware - Canon Firmware, What Is Firmware, Ricoh Firmware

[teckat]

Dear all.

I have canon ir 6255 damaged hdd machine. i have replaced the new hdd but no firmware update you can help me. vinhsesco@gmail.com. Thank you very much

---

replaced the new hdd but no firmware update

Did u have an ERROR CODE

explain above u have no firmware / or update failed

HDD needs to be Formatted with SST/or USB--- iRAdvanced 6255 Firmware


The part numbers for the Hard Disk Drive for this series machine have been updated (2015).
The new numbers are as follows:

FK2-9008-000 = iRA 6055 / 6065 / 6075
FK4-1550-000 = iRA 6275 / 6265 / 6255
-----------------------------------------------------------------------------
imageRUNNER ADVANCE 6055 / 6065 / 6075 / 6255 / 6265 / 6275 / 8085 / 8095 / 8105 / 8285 / 8295 / 8205

HD Format Error

When trying to format the Hard Drive by holding 2 & 8 down OR single mode through SST, you get an "ERROR" message when executed. The HD format script resides on the Flash Rom of the machine and can become corrupted. The machine didn't have an error code and would boot up, but would not allow firmware to load because HD Format Error would error. Obtained a new, blank Flash ROM PCB from Hardware Engineering to resolve the issue.

[vinhsesco]

---

Did u have an ERROR CODE

explain above u have no firmware / or update failed

HDD needs to be Formatted with SST/or USB--- iRAdvanced 6255 Firmware


The part numbers for the Hard Disk Drive for this series machine have been updated (2015).
The new numbers are as follows:

FK2-9008-000 = iRA 6055 / 6065 / 6075
FK4-1550-000 = iRA 6275 / 6265 / 6255
-----------------------------------------------------------------------------
imageRUNNER ADVANCE 6055 / 6065 / 6075 / 6255 / 6265 / 6275 / 8085 / 8095 / 8105 / 8285 / 8295 / 8205

HD Format Error

When trying to format the Hard Drive by holding 2 & 8 down OR single mode through SST, you get an "ERROR" message when executed. The HD format script resides on the Flash Rom of the machine and can become corrupted. The machine didn't have an error code and would boot up, but would not allow firmware to load because HD Format Error would error. Obtained a new, blank Flash ROM PCB from Hardware Engineering to resolve the issue.

hdd old no detect, i need to replace a new hdd what to do. Thank you very much

[djmic]

---

Did u have an ERROR CODE

explain above u have no firmware / or update failed

HDD needs to be Formatted with SST/or USB--- iRAdvanced 6255 Firmware


The part numbers for the Hard Disk Drive for this series machine have been updated (2015).
The new numbers are as follows:

FK2-9008-000 = iRA 6055 / 6065 / 6075
FK4-1550-000 = iRA 6275 / 6265 / 6255
-----------------------------------------------------------------------------
imageRUNNER ADVANCE 6055 / 6065 / 6075 / 6255 / 6265 / 6275 / 8085 / 8095 / 8105 / 8285 / 8295 / 8205

HD Format Error

When trying to format the Hard Drive by holding 2 & 8 down OR single mode through SST, you get an "ERROR" message when executed. The HD format script resides on the Flash Rom of the machine and can become corrupted. The machine didn't have an error code and would boot up, but would not allow firmware to load because HD Format Error would error. Obtained a new, blank Flash ROM PCB from Hardware Engineering to resolve the issue.

Hi teckat! Same problem here! for IR advance 6255 need hdd replacement. Pls send a tutorial step by step on how to install firmware for new hdd. Thank you in advance!

[TSS]

You need to format hhd, install firmware

[djmic]

You need to format hhd, install firmware

Thank you for response Tss! Do you know the step by step procedure using sst tool then install the firmware in IRA 6200 series

[teckat]

Thank you for response Tss! Do you know the step by step procedure using sst tool then install the firmware in IRA 6200 series

---

Procedure to install USB System Software to a USB Flash Drive


1. Download "USB" System Software for the iR-ADV C6275 Series for example:
iA6275_v18.02.01.zip”

2. Open the “USB_iA6275_v18.02.01” folder and place the “iA6275” Folder and “All HDFormat” files
onto your USB Flash Drive.

3. Done

USB Flash Drive:
Flashing the System Software by use of a USB Flash Drive is supported.
 SERVICE MODE > COPIER > FUNCTION > SYSTEM > DOWNLOAD

Select Format first
then ALL

[yelse]

I also experienced the same thing please send me the IR ADV 6275 firmware.
My email: yeelsee@gmail.com


Thank you very much

[Phil B.]

I also experienced the same thing please send me the IR ADV 6275 firmware.
My email: yeelsee@gmail.com Thank you very much

did you READ the whole thread? firmware is not all that you need..

have you checked the HDD in service mode to make sure it is a viable unit?

have you reformatted the HDD?

bet you didn't even backup any NVRAM!

get the manual

RTFM!!!