Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 37
Re: iRA C2220i - Jam on tray 2 while printing on tray 1 - (Jam 0A02)
I know this is an old thread but I have 2 machines this week doing the same thing. Showing 0A02 power on jam from tray 2 after printing from tray 1. Checked the sensor and the solenoid and the rollers. All good. I haven't seen it happen but there are plenty in the log. CX reports paper part way out of the cassette.
Did you ever figure out what was going on with yours Arhts?
-
Technician
- Rep Power
- 22
Re: iRA C2220i - Jam on tray 2 while printing on tray 1 - (Jam 0A02)
I had this once. I even ended up replacing cassette 1 paper pick up assembly and fault remained.
What cured it for me was item 5 on figure 310 of parts book for the IRADV22xx series. It was missing, and the new pick up assembly does not come with this.
Fitted spacer (Fc0-3637-000) to the paper pick up assembly (near the solenoid) and fault fixed. No idea why with this spacer missing, was causing paper to feed out of cassette 2, but it worked for me!.
Good luck!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks