Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Apr 2019
    Location
    Lusaka
    Posts
    2
    Rep Power
    0

    initialization failure

    good day to all.i am having this problem and am stuck.its just saying Checking data... do not turn OFF the main power.What is the solution.Canon C3325i
    Attached Images Attached Images

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    initialization failure

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: initialization failure

    What is the solution? To find a part that causes problems ofcourse.


    Boot System Error Diagnosis Tool --------Turn ON the Main Power Supply Switch while pressing the Control Panel Power SupplySwitch.


    This tool automatically checks the Control Panel, Main Controller PCB 1, All-night PowerSupply, and Non-all-night Power Supply, and notifies the result by the number of light-out andblinking interval of the lamp on the Control Panel.This tool is installed in the ROM of Main Controller PCB 1.

    Controller System Error Diagnosis Tool----------Turn ON the Main Power Supply Switch while pressing the numeric keys '2' and '4'simultaneously.

    This tool automatically checks the Main Controller PCB 1/2, child PCBs mounted on the MainController PCB 1/2, and HDD, and display the result on the Control Panel.This tool is installed in HDD.Therefore, this tool cannot be used when an error occurred in HDD or HDD cannot beaccessed.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Senior Tech 250+ Posts alex@wocltd.com's Avatar
    Join Date
    Nov 2007
    Posts
    430
    Rep Power
    38

    Re: initialization failure

    do a backless overwrite all f/w update

  4. #4
    Junior Member
    Join Date
    Oct 2020
    Location
    NY,NY
    Posts
    5
    Rep Power
    0

    Re: initialization failure

    Hi,

    I have the same problem. What was the solution?

    Thanks!



    Quote Originally Posted by silimi View Post
    good day to all.i am having this problem and am stuck.its just saying Checking data... do not turn OFF the main power.What is the solution.Canon C3325i

  5. #5
    Technician
    Join Date
    Oct 2009
    Location
    Wroclaw
    Posts
    36
    Rep Power
    30

    Re: initialization failure

    Quote Originally Posted by jimmurphy View Post
    Hi,

    I have the same problem. What was the solution?

    Thanks!
    Hi,
    Replace 1. Flash disk , 2. HDD

  6. #6
    Junior Member
    Join Date
    Oct 2020
    Location
    NY,NY
    Posts
    5
    Rep Power
    0

    Re: initialization failure

    Your talking about an optional flash disk?

    Where are there instructions for this and/or hd replacement?

    I was reading this unit came with a 250 gb drive...

    Does the hard drive need to be preformatted in any way?


    Quote Originally Posted by julka123 View Post
    Hi,
    Replace 1. Flash disk , 2. HDD

  7. #7
    Technician
    Join Date
    Oct 2009
    Location
    Wroclaw
    Posts
    36
    Rep Power
    30

    Re: initialization failure

    Quote Originally Posted by jimmurphy View Post
    Your talking about an optional flash disk?

    Where are there instructions for this and/or hd replacement?

    I was reading this unit came with a 250 gb drive...

    Does the hard drive need to be preformatted in any way?

    The flash disk is a small PCB for the mn controller, you can order it only from Canon, then install the system.

  8. #8
    Junior Member
    Join Date
    Oct 2020
    Location
    NY,NY
    Posts
    5
    Rep Power
    0

    Re: initialization failure

    So, to get to the hard drive, its behind the PCB board I was told.


    How much is the Flash Disk roughly ?

    For the hard drive, doe sit have to be formatted in a certain way?





    Quote Originally Posted by julka123 View Post
    The flash disk is a small PCB for the mn controller, you can order it only from Canon, then install the system.

  9. #9
    Technician
    Join Date
    Oct 2009
    Location
    Wroclaw
    Posts
    36
    Rep Power
    30

    Re: initialization failure

    Quote Originally Posted by jimmurphy View Post
    So, to get to the hard drive, its behind the PCB board I was told.


    How much is the Flash Disk roughly ?

    For the hard drive, doe sit have to be formatted in a certain way?
    ~100 USD

  10. #10
    Junior Member
    Join Date
    Oct 2020
    Location
    NY,NY
    Posts
    5
    Rep Power
    0

    Re: initialization failure

    Thanks for responding.

    Could you give me some more details about what's involved changing the hard drive and/or flash drive?

    Does the hard drive have to be preformatted a certain way like exfat or does the copier format the hard drive?

    Quote Originally Posted by julka123 View Post
    ~100 USD

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here