Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jun 2019
    Location
    Phayao
    Posts
    5
    Rep Power
    0

    How can i change ADF form LTR to A4 ir2535i

    i am from thailand
    my ir2535i it japan spec ADF run only LTR when i put A4 can print only LTR area.
    thank you

  2. #2
    Service Manager 10,000+ Posts
    How can i change ADF form LTR to A4 ir2535i

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,932
    Rep Power
    230

    Re: How can i change ADF form LTR to A4 ir2535i

    Quote Originally Posted by xamky View Post
    i am from thailand
    my ir2535i it japan spec ADF run only LTR when i put A4 can print only LTR area.
    thank you
    ____________

    Service Mode>SCAN>SCAN READER>OPTION>BODY>SENS CNF = 1
    Power cycle machine.

    To make the value of SENS-CNF stick after the Copier is rebooted, the following needs to be set in service mode.
    SCAN > SCAN SW > SW06 > Bit2 to 1


    Also, to enable the correct paper selection, change the following setting of the paper size
    group.
    SYSTEM > SYSTEM Numeric > 057 to 3 for inch configuration
    Or in your case, select #1 for AB
    1: AB configuration
    2: A configuration
    3: Inch configuration
    4: AB / Inch configuration
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Junior Member
    Join Date
    Jun 2019
    Location
    Phayao
    Posts
    5
    Rep Power
    0

    Re: How can i change ADF form LTR to A4 ir2535i

    Dear teckat I try step by step but not work. may i do something mis or my MC damage.
    Service Mode>SCAN>SCAN READER>OPTION>BODY>SENS CNF = 1
    Power cycle machine.

    To make the value of SENS-CNF stick after the Copier is rebooted, the following needs to be set in service mode.
    SCAN > SCAN SW > SW06 > Bit2 to 1

    Also, to enable the correct paper selection, change the following setting of the paper size
    group.
    SYSTEM > SYSTEM Numeric > 057 to 3 for inch configuration
    Or in your case, select #1 for AB
    1: AB configuration
    2: A configuration
    3: Inch configuration
    4: AB / Inch configuration[/QUOTE]


    Damaged
    Attached Images Attached Images

  4. #4
    Junior Member
    Join Date
    Jun 2019
    Location
    Phayao
    Posts
    5
    Rep Power
    0

    Re: How can i change ADF form LTR to A4 ir2535i

    every body
    Please advice.
    need help.

  5. #5
    Junior Member
    Join Date
    Jun 2019
    Location
    Phayao
    Posts
    5
    Rep Power
    0

    Re: How can i change ADF form LTR to A4 ir2535i

    Quote Originally Posted by xamky View Post
    i am from thailand
    my ir2535i it japan spec ADF run only LTR when i put A4 can print only LTR area.
    thank you
    Dear every body
    I have the way to fix this. But may not correct 100% but it work on every vertion MC.
    1.Choose Malaysia
    2.pull out conecter of A3 paper on ADF


  6. #6
    Service Manager 10,000+ Posts
    How can i change ADF form LTR to A4 ir2535i

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,932
    Rep Power
    230

    Re: How can i change ADF form LTR to A4 ir2535i

    Quote Originally Posted by xamky View Post
    every body
    Please advice.
    need help.



    Related Service Mode:
    Select the following service mode to determine whether to detect the original size:
    SCAN > READER > OPTION > USER > SIZE-DET
    <Setting value>
    0: The original size is not detected.
    1: The original size is detected.


    Perform the following procedure to switch between AB and inch configuration.

    1. SCAN > SCAN SW > SW06 > Bit2
    Set the value to 1 about the above service mode, and then turn the power switch to off
    and then on.

    2. SCAN > READER > OPTION > BODY > SENS-CNF
    <Setting value>
    0: AB configuration
    1: Inch configuration
    2: A configuration

    To enable the correct paper selection, change the following setting of the paper size
    group if necessary.

    3. SYSTEM > SYSTEM Numeric > 057
    <Setting value>
    1: AB configuration
    2: A configuration
    3: Inch configuration
    4: AB / Inch configuration


















    SCAN SW.jpg

    ■■FEEDER
    ●●(#SCAN> FEEDER> ADJUST> DOCST)
    Adjusting the original stop position for ADF pickup (original tray pickup).
    Delivering the original enables the setting. Be sure to press the OK key to deliver the original.
    When changing the setting, input the setting on the main station service label.
    The larger the value, the smaller the leading edge margin.
    ●●(#SCAN> FEEDER> ADJUST> LA-SPEED)
    Adjusting the original feeding speed in stream reading.
    Use this mode to adjust the original feeding speed in stream reading mode.
    The larger the setting, the faster the speed (the image reduced).
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here