Which SMB version support by Canon C5200 series.

[denvertan]

did you put zeroes in ID? it must be 00006721 and not 6721

it is a common mistake

Yes I did. Tried it wirh leading zeros, withoit zeros all not working.

[disamm]

which version is now on the device?

[jaeson]

Hi,
Canon recommend the following actions for MFD’s that support only SMB v1 such as iRADV C52XX:
Request the customer to use either WebDav or FTP instead of SMB v1 for scan to folder functionality

When this is not possible or acceptable, update the device with special firmware 54.58 that adds support forSMB v2 and v3.

see attached pdf

hii, thx for sharing smb firmware info, , how about iradv4245？same special firmware password？

[disamm]

No, for the 42XX you have another password:

00006037 44648739

[jaeson]

No, for the 42XX you have another password:

00006037 44648739

okok, tqvm, appreciate

[denvertan]

which version is now on the device?

This is the screen capture of the version for the copier.
Please have a look at the link below.

Canont SMB at all C5235i - Album on Imgur

[disamm]

Hi denvertan
Strange combination of numbers.
With the MN-Cont 31 the dc con is the version 13 and not 8.
Try to install first the last official release, 56.08, and the retry to install this special version.

[denvertan]

Hi denvertan
Strange combination of numbers.
With the MN-Cont 31 the dc con is the version 13 and not 8.
Try to install first the last official release, 56.08, and the retry to install this special version.

Tried without luck. I have a IRA4245i work perfectly with the update.
But this IRAC5235i cannot even see the official release at all.

[disamm]

how'd you try?
Via Settings or Service Mode? Try to update the device in service mode.

[denvertan]

how'd you try?
Via Settings or Service Mode? Try to update the device in service mode.

I have tried inside service mode, remote ui, admin mode.
None is working.