Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Mar 2017
    Posts
    25
    Rep Power
    6

    IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    Hi, anyone had counter this problem? the printing got some bold/jerking font when printing,intermittent only... not continuosly. can check sample print below as attached document. i do really appreciate if any can helps me.
    Attached Files Attached Files

  2. #2
    Master Of The Obvious 10,000+ Posts
    IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,536
    Rep Power
    296

    Re: IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    I can't tell you exactly what's causing it, but that's a compression blur. The paper was traveling slower than the image on the drum.

    Several things can cause this:
    The paper may be slipping against the registration rollers.
    You may be losing drive to registration rollers
    More likely the fuser is turning slightly slower, buckling the paper away from the drum as the trail edge is released from the registration rollers.

    So that gives you three things to look at. Start with the last one. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Mar 2017
    Posts
    25
    Rep Power
    6

    Re: IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    Quote Originally Posted by blackcat4866 View Post
    I can't tell you exactly what's causing it, but that's a compression blur. The paper was traveling slower than the image on the drum.

    Several things can cause this:
    The paper may be slipping against the registration rollers.
    You may be losing drive to registration rollers
    More likely the fuser is turning slightly slower, buckling the paper away from the drum as the trail edge is released from the registration rollers.

    So that gives you three things to look at. Start with the last one. =^..^=

    thanks for the guide. i will try this step

  4. #4
    Field Supervisor 500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    878
    Rep Power
    45

    Re: IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    Like BC said, check the last one. I would start with trying different paper formats and with trying to change paper settings to thick one, this will reduce processing speed and eventually match speed. If fine adjustments of Fuser speed is available on this model I will give them a try also.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  5. #5
    Service Manager 1,000+ Posts
    IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,194
    Rep Power
    42

    Re: IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    That looks like it would be lead edge. Donít rule out transfer/drum area. Make sure drum screw is tight. Just had one loosen up on that model a few days ago. Donít remember the quality issue but it eventually went blank. Transfer belt can shift dramatically when it gets old and stretched. Registration clutch? Is the registration varying at all? Any burrs or toner crust in fuser entrance?


    Sent from my iPad using Tapatalk

  6. #6
    Technician
    Join Date
    Mar 2017
    Posts
    25
    Rep Power
    6

    Re: IRADV 6055 GOT BOLD STRAIGHT LINE WHEN PRINTING, intermittent ONLY

    Solved the problem, registration roller problem.. to slippery. Thanks guys for your help.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here