Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Service Manager 1,000+ Posts
    Canon Parts source

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,089
    Rep Power
    44

    Canon Parts source

    Most of the time I use Precision roller for my immediate parts need on Canons. I was just informed that they no longer
    have an arrangement with Canon for parts.
    I may have to get a main board for the IRA C2030. For boards I usually go to Hytec or Nationwide. But for the other things
    like feed rollers and other stuff I would usually use Precision roller.

    Any suggestions where an indy can get parts for Canons?

    Thanks

    DR

  2. #2
    Master Of The Obvious 10,000+ Posts
    Canon Parts source

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Canon Parts source

    I used to get Canon parts from Executive Color (Executive Color Systems, Inc.) but there are no longer any references to Canon, so I think that they've changed their focus to KM.

    You can get fusers and fuser parts from:
    Fixing Assembly, Fixing Film Unit, Canon, Gestetner, HP, Lanier, Ricoh, Savin
    - Fusion Image Technology


    You can try:
    bizhub Imaging Units, Toner, Developer Units, Fusers

    The other places aren't in business any longer. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 10,000+ Posts
    Canon Parts source

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon Parts source

    Quote Originally Posted by Desert Rat View Post
    Most of the time I use Precision roller for my immediate parts need on Canons. I was just informed that they no longer
    have an arrangement with Canon for parts.
    I may have to get a main board for the IRA C2030. For boards I usually go to Hytec or Nationwide. But for the other things
    like feed rollers and other stuff I would usually use Precision roller.

    Any suggestions where an indy can get parts for Canons?

    Thanks

    DR


    Aliexpress.com
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Service Manager 10,000+ Posts
    Canon Parts source

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Canon Parts source


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here