Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Jam code 000203

  1. #1
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Jam code 000203

    Good day to all
    i have a canon ir 8105 when i start copying 2 sets in duplex mode. Suddenly the first set i ciming completely but when the last set is copying 000203 jam code occurs. I already clean the vertical path section and all the sensor in it and i clean already the all tge vertical roller and i replaced a new feed roller. Can you help me. How can I solve the problem. Thank you

  2. #2
    Service Manager 10,000+ Posts
    Jam code 000203

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: Jam code 000203

    Quote Originally Posted by Momiowilove View Post
    Good day to all
    i have a canon ir 8105 when i start copying 2 sets in duplex mode. Suddenly the first set i ciming completely but when the last set is copying 000203 jam code occurs. I already clean the vertical path section and all the sensor in it and i clean already the all tge vertical roller and i replaced a new feed roller. Can you help me. How can I solve the problem. Thank you
    how many pages on parts and supplies?

    how long has it been doing this?

    can you posts pics of the paper jammed ?

  3. #3
    Service Manager 10,000+ Posts
    Jam code 000203

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam code 000203

    Quote Originally Posted by Momiowilove View Post
    Good day to all
    i have a canon ir 8105 when i start copying 2 sets in duplex mode. Suddenly the first set i ciming completely but when the last set is copying 000203 jam code occurs. I already clean the vertical path section and all the sensor in it and i clean already the all tge vertical roller and i replaced a new feed roller. Can you help me. How can I solve the problem. Thank you


    Put xtra wrap on spring

  4. #4
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Question Re: Jam code 000203

    What is the location of the sensor that i will put a extra wrap?

  5. #5
    Service Manager 10,000+ Posts
    Jam code 000203

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam code 000203

    Quote Originally Posted by Momiowilove View Post
    What is the location of the sensor that i will put a extra wrap?
    Try vertical first
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Question Re: Jam code 000203

    The vertical path is a photosensor there's no flag sensor there

  7. #7
    Service Manager 10,000+ Posts
    Jam code 000203

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Jam code 000203

    Quote Originally Posted by Momiowilove View Post
    The vertical path is a photosensor there's no flag sensor there

    right, sorry thinking of another issue.

    Is issue from running paper out of Right Deck ????
    or
    from cassette 3 or 4 ???

    Try replacing the bushings on the vertical path rollers with bearings .
    There are two sizes of bearings used. For the front (XG9-0709-000) and for the rear (XG9-0466-000)



    Check that the wiring harness that goes from the feed assembly to the Feed Driver PCB is not damaged.
    if so >>Replace the harness ( FM4-1035-000 )


    also
    Try replacing PS24 .
    PS24 is the Vertical Path Sensor 1, and can be checked in I/O mode > P-Sensor > DCCON > P012 - 8 > 1=Paper present.
    Also, check the wire harness & connection that goes to PS24.

    PS24 part number is FK2-6470-000
    Sensor cable harness part number is FM4-1001-000

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Re: Jam code 000203

    I just replace that sensor. I get the sensor in tge good runnubg unit but the jam error is still occurs.

    Sent from my RNE-L22 using Tapatalk

  9. #9
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Re: Jam code 000203

    All of cassettes from 1 to 4 cassette. I tried to replace all the vertical rollers and i tried to clean the registration and duplex paper path but still it occurs 000203

    Sent from my RNE-L22 using Tapatalk

  10. #10
    Trusted Tech 50+ Posts Momiowilove's Avatar
    Join Date
    Sep 2019
    Location
    Al hasa
    Posts
    63
    Rep Power
    10

    Re: Jam code 000203

    Good day mr teckat. Can you please tell where is the location of the Gripper Motor (Finisher-D1) canon ir 8105 bcos i have a problem error occurs E514-8006
    Thank you so much if you have a manual of this finsiher can you send to my email marvie.longgos07@gmail.com


    Sent from my RNE-L22 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here