Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member Ras dagbandoo's Avatar
    Join Date
    Sep 2019
    Location
    Yendi
    Posts
    4
    Rep Power
    0

    Post Top of Printouts blur

    dear tecs, printouts fron canon Imagerunner C5030i is blur at the top and 3 quarter ok. Auto color mismatch failed and gives warning of calling service tech on continues error. how do I solve it?

  2. #2
    Service Manager 5,000+ Posts
    Top of Printouts blur

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Top of Printouts blur

    Quote Originally Posted by Ras dagbandoo View Post
    dear tecs, printouts fron canon Imagerunner C5030i is blur at the top and 3 quarter ok. Auto color mismatch failed and gives warning of calling service tech on continues error. how do I solve it?
    We need for info in order to help.

    1. Can you post a sample of the print quality issue?
    2. What is the error code?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Service Manager 10,000+ Posts
    Top of Printouts blur

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: Top of Printouts blur

    what are the counts on drums/toners/fuser/belt?

    how long since serviced?

  4. #4
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Posts
    247
    Rep Power
    34

    Re: Top of Printouts blur

    Start with the most simple thing:

    Clean the laser slit glass!


    Open the front door, you should find a long plastic tool attached. It has a small cleaning pad on one end. Now look at the area around waster toner box, you should be able to see 4 identical holes (shaped a bit like the RJ45 female network connnector.) With the cleaning pad facing down, insert the plastic tool through these holes and push it slowly all the way to the end, pull it out again. Repeat, and repeat for all 4 holes.

    This will clean the glass the lasers fires through - dirt/dust sitting the glass will cause stripes and blurred prints.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here