Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Field Supervisor 500+ Posts
    E020-0190 AdvC2030


    Join Date
    Sep 2008
    Location
    Lewisville
    Posts
    539
    Rep Power
    28

    E020-0190 AdvC2030

    Customer has Adv C2030, had pink background on color copies, they bought a Magenta drum unit off Amazon and installed it. Still getting full pink copies now also has E020-0190. They are pretty far outside our service area but are begging for help so want to make sure we have everything we need before driving out there. Any experience with this?

  2. #2
    Service Manager 1,000+ Posts
    E020-0190 AdvC2030

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,212
    Rep Power
    43

    Re: E020-0190 AdvC2030

    I had the same code a while back and had to replace black and magenta drum. Check drum life in service mode


    Sent from my iPad using Tapatalk

  3. #3
    Senior Tech 100+ Posts
    E020-0190 AdvC2030

    Northwestservice's Avatar
    Join Date
    Jan 2011
    Location
    terrace,bc,canada
    Posts
    133
    Rep Power
    21

    Re: E020-0190 AdvC2030

    E020 0190 05 Title ATR Sensor (M) error or toner supply error
    Detection The average value of detected inductance sampling value
    is equal to or lower than the specified value (0x0F)
    Remedy 1. Check if the Drum Unit (M) is installed.
    2. Check the Drum Unit Relay PCB (M) (UN27).
    3. Check the Drum Unit Memory PCB (M) (UN31).
    4. Check the harness/connector between the DC Controller
    PCB (UN09/ J25) and the Drum Unit Relay PCB (M) (UN27).
    5. Replace the Drum Unit (M).
    6. Replace the DC Controller PCB (UN09)

    was the new drum installed cold ?

    take the m drum out, close front door, let the machine determine the drum is not there. install new drum unit.I do this procedure to replace every drum on this model. if this does not work try swapping out the drum chip from the old drum to the new drum.

  4. #4
    Service Manager 2,500+ Posts
    E020-0190 AdvC2030

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    3,701
    Rep Power
    70

    Re: E020-0190 AdvC2030

    Quote Originally Posted by repeatcopiers View Post
    Customer has Adv C2030, had pink background on color copies, they bought a Magenta drum unit off Amazon and installed it. Still getting full pink copies now also has E020-0190. They are pretty far outside our service area but are begging for help so want to make sure we have everything we need before driving out there. Any experience with this?
    Did you clean the laser glass (tool inside the front door) or you can remove the unit & clean it properly inside & out.

    Also make sure the firmware is on latest common issue.

    As a test you can swap the old chip to the new drum.
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    Service Manager 1,000+ Posts
    E020-0190 AdvC2030

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,007
    Rep Power
    29

    Re: E020-0190 AdvC2030

    Quote Originally Posted by copier tech View Post
    Did you clean the laser glass (tool inside the front door) or you can remove the unit & clean it properly inside & out.

    Also make sure the firmware is on latest common issue.

    As a test you can swap the old chip to the new drum.
    I always thought it was MUCH easier to remove the laser unit from the left side of the machine to clean it. I never liked the "service mode /open laser" shutter process.

  6. #6
    Service Manager 2,500+ Posts
    E020-0190 AdvC2030

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    3,701
    Rep Power
    70

    Re: E020-0190 AdvC2030

    Quote Originally Posted by guitar9199 View Post
    I always thought it was MUCH easier to remove the laser unit from the left side of the machine to clean it. I never liked the "service mode /open laser" shutter process.
    Once you’ve taken that ribbon cable ofF a few dozen times the contacts become worn & then you’re in trouble big job to replace that.

    I start by using the tool of this does the job I dont risk taking the laser out
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  7. #7
    Field Supervisor 500+ Posts
    E020-0190 AdvC2030


    Join Date
    Sep 2008
    Location
    Lewisville
    Posts
    539
    Rep Power
    28

    Re: E020-0190 AdvC2030

    Quote Originally Posted by repeatcopiers View Post
    Customer has Adv C2030, had pink background on color copies, they bought a Magenta drum unit off Amazon and installed it. Still getting full pink copies now also has E020-0190. They are pretty far outside our service area but are begging for help so want to make sure we have everything we need before driving out there. Any experience with this?
    So our tech went to check this out, they said they ordered a Magenta drum and installed it, but they actually bought a toner, not a drum! New drum has fixed the issue.

  8. #8
    Service Manager 1,000+ Posts
    E020-0190 AdvC2030

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,027
    Rep Power
    35

    Re: E020-0190 AdvC2030

    I'm having a similar problem on this model. The code is E-00020-01b0. It still points to the magenta color.
    The first time I replaced the drums for this issue I used the old chips to make the E0020 code go away. I did not pull the laser
    unit as advised. Had to go back and re install the new chips and pulled the laser unit and cleaned the poly mirror and the others.
    Cleaned the patch sensors under the transfer belt too. I did all of these items today also.
    I also wiped the lens off. Cleaned the laser dust proof glasses on both sides. The problem went away till now. I'm going to replace
    the magenta drum unit tomorrow. The numbers in the counters don't match up. The LF reads 178% on the magenta but the PT MDRUM sez 42k.
    Glad I read this post to remind me to close the door without the drum in till the machine sees it is missing.


    Measure to Prevent an E020-1x60 Immediately After Replacing the Drum Unit.pdf

    Here is the pdf that explains how to clean the laser poly mirror.

    DR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here