Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,977
    Rep Power
    223

    Re: reset counter to 0

    Quote Originally Posted by vinhsesco View Post
    I work for rent because I want to get to 0
    That is still considered fraud in most countries. Jail time can vary.

  2. #12
    Service Manager 5,000+ Posts
    reset counter to 0

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,656
    Rep Power
    103

    Re: reset counter to 0

    Quote Originally Posted by vinhsesco View Post
    I work for rent because I want to get to 0
    have you:
    replaced ALL consumables?
    rebuilt/replaced all feed/sensors/transport/exit/adf assemblies?
    thoroughly clean ALL covers/metal/plastic parts?

    (nope I guarantee you haven't_

    if you haven't you are running a scam!

    here's a better way....
    Do the major parts of my questions. supplies=pm parts=feed/transport rollers

    leave the counters alone (you'll mess up PM cycles)
    take a start page/usage pages.. note counts on rental contract (you do have one )
    deliver it .. telling customer what has been done to cover past page counts to bring it up to rental standards.
    set the supply/PM notices to come to your company.
    do the damn PM's on time and do not HALF ASS the PM's.


    you look like a more honest service group
    and word of MOUTH is the BEST/worse advertisement you can ever have.

    Be straight with people .. or it could come back around and bite your ASS OFF! ( I worked for a FUCKER like you seem to be.. he was only in business for 5 years.. still has 5 years in FEDERAL prison for fucking over the NCAG on a "Compaq Server" that had ALL clone parts in it!) *not even the RAM he used was Compaq*

    but be the shit you want to be.. but do not expect any more help/advise from me ..ever.. but you can expect more red cards from me if I see you asking these same type help in the future!

  3. #13
    Junior Member
    reset counter to 0


    Join Date
    Apr 2019
    Location
    los angeles
    Posts
    4
    Rep Power
    0

    Re: reset counter to 0

    reminds me of matilda,when Danny Devito is using the drill to reset the counter

  4. #14
    Technician
    Join Date
    Jun 2009
    Location
    canada
    Posts
    24
    Rep Power
    0

    Re: reset counter to 0

    Quote Originally Posted by nanohitmen View Post
    reminds me of matilda,when Danny Devito is using the drill to reset the counter

    I will talk to customers. I thank all of you very much

  5. #15
    Junior Member
    Join Date
    Nov 2011
    Posts
    6
    Rep Power
    0

    Re: reset counter to 0

    Quote Originally Posted by vinhsesco View Post
    I work for rent because I want to get to 0
    hello, what you should do is change the NV RAM. This sets the counter to zero. The firmware only updates the device. If you rent the equipment it is obvious that it has a previous use and deals with the client. If you want to pass the equipment as new, it is fraud. rent new equipment

  6. #16
    Senior Tech 250+ Posts
    reset counter to 0

    terramobil's Avatar
    Join Date
    Nov 2009
    Location
    Düsseldorf/Germany
    Posts
    428
    Rep Power
    27

    Re: reset counter to 0

    Quote Originally Posted by KenB View Post
    In the movies, you always have to cut the BLUE wire.

    If not...KABOOM!

    The iR ADV 6255i is a B/W device, so you have to cut the BLACK wire.

    And in this case, the counter isn't 0, it is reset to 007.

  7. #17
    Trusted Tech 50+ Posts
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    90
    Rep Power
    6

    Re: reset counter to 0

    i have a easier way for you to get counter to 0

    turn machine upside down and print.
    your counter will then go backwards.

  8. #18
    Engineer senior giogi's Avatar
    Join Date
    Jan 2016
    Location
    Italy
    Posts
    31
    Rep Power
    0

    Re: reset counter to 0

    there is the possibility to reset the counters
    I know how to do it, but.... I don’t say!


  9. #19
    Technician
    Join Date
    Aug 2019
    Location
    hamyang
    Posts
    19
    Rep Power
    0

    Re: reset counter to 0

    I am possible.
    Write the F_RAM installation program to the counter board using the jig, put it in the machine, and enter the service mode. Clear MMI OK The total counter becomes "0".

  10. #20
    Service Manager 5,000+ Posts
    reset counter to 0

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,656
    Rep Power
    103

    Re: reset counter to 0

    Quote Originally Posted by Copier repairman View Post
    I am possible.
    Write the F_RAM installation program to the counter board using the jig, put it in the machine, and enter the service mode. Clear MMI OK The total counter becomes "0".

    I am possible.


    maybe in YOUR country but in alot of the world IT IS ILLEGAL!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here