Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Toner cyan sign

  1. #1
    Junior Member
    Join Date
    Jul 2019
    Location
    selangor
    Posts
    5
    Rep Power
    0

    Toner cyan sign

    Does any experts here know this problem
    Change toner hopper--- yes
    Toner hopper motor----yes
    New toner-----yes

    Sent from my TA-1021 using Tapatalk

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    98
    Rep Power
    0

    Re: Toner cyan sign

    Quote Originally Posted by zuckryyu View Post
    Does any experts here know this problem
    Change toner hopper--- yes
    Toner hopper motor----yes
    New toner-----yes

    Sent from my TA-1021 using Tapatalk
    hello you already tried to open FIXING / FEED ASSEMBLY, turn on the printer and enter the service mode: COPIER-FUNCTION-CLEAR-ERR_OK you turn off and turn on the machine when the screen tells you to close the door, close the FIXING / FEED ASSEMBLY and main door

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    98
    Rep Power
    0

    Re: Toner cyan sign

    the other would be to take out the BOTTLE EXCHANGE COVER ASSEMBLY, activate the sensors with pieces of paper and put the toner bottle, check if the cyan toner bottle is rotating

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    98
    Rep Power
    0

    Re: Toner cyan sign

    Remedy:
    Identify the cause of the error whether it is due to
    mechanical problem to open/close the Toner Cap or
    problem at the Toner Container Cam HP Sensor side. ■
    1. Check if the Toner Container Cam HP Sensor is soiled
    and the installation of the sensor. ■
    2. Rotate the Set-on Drive Shaft a little with the attached
    tool, and check the service mode (COPIER> I/O> DCON>
    P024 bit6) to see that the output value of the sensor is
    changed. ■
    Since it is difficult to check the screen while rotating it,
    repeat the operation to rotate it a little and check the
    screen until the value is changed. ■
    If it is normal, the output value of the sensor is changed
    when opening/closing the Toner Cap. Even if it is normal,
    be sure to perform step 4 and later steps. ■
    2-1. If there is an error in rotation of the Set-on Drive
    Shaft, check the drive system such as gears. ■
    If it is damaged, replace the Set-on Drive Unit and then
    perform step 4 and later steps. ■
    2-2. When the Set-on Drive Unit is not driven although
    the Set-on Drive Shaft rotates, check if it is driven by
    removing the Hopper Unit. ■
    If it is not driven, replace the Hopper Unit and then
    perform step 4 and later steps. ■
    2-3. When the output value of the sensor is not changed
    although the Set-on Drive Unit is driven, check the Sensor
    Harness (to see if the harness is caught, disconnected or
    physically removed). ■
    If there is no problem, replace the sensor. After checking
    the output value in step 2, perform step 4 and later steps. ■
    3. If the problem is not solved by replacing the foregoing
    parts, replace the Drum Driver PCB (UN4) and then
    perform step 4 and later steps. ■
    4. Clear the error in service mode (COPIER>
    FUNCTION> CLEAR> ERR), and then turn OFF and then
    ON the main power. ■
    5. Replace the toner (reinstall the removed Toner
    Container) at least once in user mode (Adjustment/
    Maintenance> Replace Specified Toner), and check that
    toner replacement can be performed normally

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here