Results 1 to 5 of 5
  1. #1
    Technician
    Join Date
    Mar 2011
    Posts
    21
    Rep Power
    27

    canon ir8285 feeder problem.

    when machine is turn on. Machine can operate as usual. When using feeder for photocopy, and jam code occur, shown remove the paper. Nothing inside but still showing the jam. I need to restart machine so that it is back to normal. Once i using the feeder. Same problem come again. Anyone have the kind of problem before?? Please help. Your help are really needed. Thank you.

    "jam code: 0094 power on."

  2. #2
    Senior Tech 100+ Posts khattab.al.masry's Avatar
    Join Date
    Jan 2014
    Posts
    212
    Rep Power
    0

    Re: canon ir8285 feeder problem.

    Hello Dear:
    we faced the same problem and follow the following steps:
    [Symptom]

    A jam code of 0094 is being generated in the Feeder. Sensors PCB4 and PCB5 were replaced, because both sensors were showing paper present. An RCON clear was performed to no avail. All wiring was checked from the sensor; through the DF Driver, and then out to the Reader Controller. The Reader Controller was replaced, but the jam was still occurring.

    • 0094: All feed sensor Power ON

    All Feed Sensors include the following:
    Delivery Sensor (PCB5): COPIER > IO > R-CON > P006 > bit 3 (0: Paper presence)
    Read Sensor 2 (SR5): COPIER > IO > R-CON > P006 > bit 2 (0: Paper presence)
    Read Sensor 1 (PCB4): COPIER > IO > R-CON > P006 > bit 1 (0: Paper presence)
    Registration Sensor (PCB3): COPIER > IO > R-CON > P006 > bit 0 (0: Paper presence)
    Delay sensor (SR4): COPIER > IO > R-CON > P006 > bit 5 (0: Paper presence)
    Post-separation Sensor 3 (PCB2): COPIER > IO > R-CON > P006 > bit 4 (0: Paper presence)

    [Remedy]

    In this case, the DF Driver PCB was replaced, to resolve the issue. Part Number for the DF Driver is FM0-0717
    But in final solved as mentioned by replacing pcb (FM0-0717)

    Attached Files Attached Files

  3. #3
    Service Manager 1,000+ Posts
    canon ir8285 feeder problem.

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: canon ir8285 feeder problem.

    Check the sensor as the paper makes the turn down towards the glass. I've had the receiver come off and shift. Not sure if the same feeder style. Whats the jam code? That will help you pin point it.

  4. #4
    Technician Copylady72's Avatar
    Join Date
    Jul 2019
    Location
    Arkansas
    Posts
    35
    Rep Power
    10

    Re: canon ir8285 feeder problem.

    Quote Originally Posted by ktleoh80 View Post
    when machine is turn on. Machine can operate as usual. When using feeder for photocopy, and jam code occur, shown remove the paper. Nothing inside but still showing the jam. I need to restart machine so that it is back to normal. Once i using the feeder. Same problem come again. Anyone have the kind of problem before?? Please help. Your help are really needed. Thank you.

    "jam code: 0094 power on."
    I think I saw this before. Check and make sure the reflector guide didn't get knocked out of place.



    Sent from my SM-N950U using Tapatalk

  5. #5
    Service Manager 1,000+ Posts
    canon ir8285 feeder problem.

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: canon ir8285 feeder problem.

    Exactly
    Quote Originally Posted by Copylady72 View Post
    I think I saw this before. Check and make sure the reflector guide didn't get knocked out of place.



    Sent from my SM-N950U using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here