I did check J8934 side pin 1(+5) and Pin 4(GROUND).
Screen Shot 2019-12-12 at 6.39.12 PM.jpg
I check J8934 Pin 1 is.. +5.11 Pin 4 is Ground OK! PIN 1..+5.11 is ok?
and I did check too breaking of a wire between J1251 (pin 8,9,10,11) and J8934 ( pin 1,2,3,4 ) --> No problem! connection ok!
I changed PS134(J8934) sensor too..
I buy this sensor from china... is this defective product?
original PS134 and CHINA PS134 didn't work..same..
have you any good idea?
imagepress c650 no function? forced waste toner container reset?
or No cable forced a short circuit reset? T_T
really really I want solve this problem..T_T
how about this picture?
Screen Shot 2019-12-12 at 6.50.43 PM.jpg
if my problem is not cable or sensor or dc controller pcb.
distance problem? between PS134 SENSOR and waste toner container?
I did move waste toner container to sensor side with forced push.. didn't work reset process..T_T
if you have any ideas, reply me..
thanks! ; )
have a niceday!
Bookmarks