Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Feb 2016
    Location
    London
    Posts
    17
    Rep Power
    10

    Canon Ir 1435if jamming every 10 copies at pick up

    Canon iR 1435if is jamming at Sep/feed rollers around every 10 copies. fitted new pick up and feed/Sep rollers. Making a loud noises before jam occurs. have had a look at drive system but not removed yet.
    Any thoughts folks please.

  2. #2
    Service Manager 1,000+ Posts
    Canon Ir 1435if jamming every 10 copies at pick up

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,336
    Rep Power
    51

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Don't really have jam issues but did you check and make sure the pick up rollrs are snapping back into place? There's a spring that pulls them back to home postion that I've had come off.

  3. #3
    Technician
    Join Date
    Feb 2016
    Location
    London
    Posts
    17
    Rep Power
    10

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Thanks For reply. I know the pick up return spring is in place I have seen these come off before so had checked.😒 I agree with you normally these donít have major jamming issues. I am beginning to think it could be a drive assembly issue hence the noise. Could be gears ? Hoping somebody may have had similar problems.

  4. #4
    Engineer senior 50+ Posts giogi's Avatar
    Join Date
    Jan 2016
    Location
    Italy
    Posts
    89
    Rep Power
    16

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    see attach
    Attached Files Attached Files
    "Knowledge is a source, but unfortunately ignorance is a sea."

  5. #5
    Technician Copylady72's Avatar
    Join Date
    Jul 2019
    Location
    Arkansas
    Posts
    35
    Rep Power
    3

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Quote Originally Posted by sly View Post
    Thanks For reply. I know the pick up return spring is in place I have seen these come off before so had checked.Canon Ir 1435if jamming every 10 copies at pick up I agree with you normally these donít have major jamming issues. I am beginning to think it could be a drive assembly issue hence the noise. Could be gears ? Hoping somebody may have had similar problems.
    What kind of noise? I had a machine that made a very loud rubbing noise as it was feeding paper. It jammed intermitently.

    It ended up being the torque limiter on the feed separation roller shaft.

    Part# FE4-4179-000



    Sent from my SM-N950U using Tapatalk

  6. #6
    Technician
    Join Date
    Feb 2016
    Location
    London
    Posts
    17
    Rep Power
    10

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Thank you folks for your replies. both with useful information. Will order the new torque limiter as it does sound like that of the hard rubber separation roller binding causing jams . Will also check the lever behind the pick up shaft gear at rear of machine for excess grease. Will keep you posted later this week thanks.

  7. #7
    Senior Tech 100+ Posts
    Canon Ir 1435if jamming every 10 copies at pick up

    techandtrader's Avatar
    Join Date
    Jun 2016
    Location
    Oklahoma City OK
    Posts
    201
    Rep Power
    11

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Quote Originally Posted by sly View Post
    Thank you folks for your replies. both with useful information. Will order the new torque limiter as it does sound like that of the hard rubber separation roller binding causing jams . Will also check the lever behind the pick up shaft gear at rear of machine for excess grease. Will keep you posted later this week thanks.
    What was it?

  8. #8
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Brantford, Ontario
    Posts
    638
    Rep Power
    31

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Have seen the gear tips wear, the one that engages when solenoid releases it.
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  9. #9
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,607
    Rep Power
    51

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Torque limiter. Changed a few on these...grunts when it feeds

  10. #10
    Trusted Tech 50+ Posts
    Canon Ir 1435if jamming every 10 copies at pick up

    wingit's Avatar
    Join Date
    Feb 2011
    Location
    Chicago
    Posts
    70
    Rep Power
    0

    Re: Canon Ir 1435if jamming every 10 copies at pick up

    Quote Originally Posted by Canuck View Post
    Torque limiter. Changed a few on these...grunts when it feeds
    I had this on the optional 2nd paper tray, and replaced all the rollers,torque limiter.Still double clutching and jamming.
    It ended up the solenoid pawl needed to be filed down so more of the pawl was holding back the sleeve part. and I used a spring from a hplj 4250 solenoid spring.
    Give a man a fish he eats for a day,Teach a man to fish he eats for a Life time.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here