Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Canon C5030 with Fiery W10-01 ImagePass B1
Hi everybody,
First I apologize for my english and I hope I use correctly this forum.
I read with attention technical forum about installation of software of ImagePass B1 and ImagePass B2 from the USB Prep Tool CD to a USB flash drive.
My problem is that I search on all the CD I have with my Canon Printer C5030 and my Fiery W10-01 ImagePass B1 and I don't find the USB Prep Tool CD.
I went on EFI website to find this software but nothing for the ImagePass B1, I only find the software for ImagePass B2 for Canon imageRUNNER ADVANCE C5255/ C5250/ C5240/ C5235.
So my question is :
- can I install the software of ImagePass B2 on my Fiery W10-01
or
- does someone can help me to find the USB Prep Tool CD and the system software or an iso file with the system sofware to re-intall the ImagePass B1 software on my Fiery?
I have two machines Canon imageRUNNER ADVANCE C5030 with Fiery and now none works.
First one didn't work and I put the Fiery of the other one on it and it works again. So I made a clone of the hard disk of the Fiery and put it on the other Fiery. And after the Canon C5030 was working again with the two Fiery.
But when I turn on the two machine with Fiery with exact clone hard disk, one start to not work and now both are out of service.
The Touch Panel still displays the message, “Wait a moment (Check the power source of the printer server behind the main unit and cable connection if the display does not change in a moment.)” , sometimes it comes to "please wait" but never the machine reach to communicate with the Fiery.
When I scanned the IP chain I don't see any of them.
If I put a monitor on the Fiery, the message is "Uncompresssing Linux ... Ok, booting the kernel."
And nothing more.
I precise that I'm not an expert, I just want to save my two machines who still working perfectly before this problem of Fiery that makes them unusable.
I suppose it is problem of software on ImagePass because it started to work with the hard disk of another Fiery.
I suppose that with a clone of the hard disk on the same network, it happened a kind of conflict and I have to re-install properly the software on the two Fiery.
Thanks for your help.
Good kisses from France
Last edited by Farux; 01-22-2020 at 06:52 PM.
-
Senior Tech
250+ Posts
- Rep Power
- 38
Re: Canon C5030 with Fiery W10-01 ImagePass B1
Page Not Found 404!
Download Center
Download Center - Support & Downloads
Important information about installing Fiery Drivers, Command WorkStation, and Color Profiler Suite for Mac OS.
Search and download application software and tools in 2 easy steps. For further assistance, please visit our EFI Communities.
Download the Fiery Driver Configurator to make custom Fiery 4.8+ drivers.
1
Select Software
-- Pick --Adobe Acrobat & Enfocus PitstopES-x000Fiery CentralFiery Clone Tool for Embedded ServersFiery Clone Tool for External ServersFiery Color Profiler SuiteFiery Command WorkStation PackageFiery Distiller SettingsFiery DriverFiery eXpressFiery Extended ApplicationsFiery FreeForm CreateFiery GAPPE Trial PatchFiery JobFlowFiery PatchesFiery Remote ScanFiery ScanFiery Software Uninstaller for MacFiery ToolBoxFiery USB Setup ToolFiery VueFiery XFJDFExpress TicketsPrinting System 15 PatchPrintSmith ClassicPrintSmith VisionProfiles
2
Select Version
-- Pick --USB Setup Tool v2.0.26
Find
Direct Download Link
EFI Software Fiery USB Setup Tool v2.0.26 Fiery Server
File Name :
Fiery USBSetupTool.exe
Type :
Fiery Server
Platform :
Fiery Server
Language :
English
Release Date :
23/11/2016
File Size :
64.84 MB
Comments :
Fiery USB Setup Tool v2.0.26 (previously known as USB Prep Tool) is used to prepare bootable USB flash drives for Integrated Fiery servers and to copy the selected project to be executed.
Download
EFI Software Fiery USB Setup Tool v2.0.26 Fiery Server
File Name :
45123641_FieryUSBSetupTool_UserGuide.pdf
Type :
User Documentation
Platform :
Fiery Server
Language :
English
Release Date :
23/11/2016
File Size :
100.70 KB
Comments :
Fiery USB Setup Tool User Guide.
Download
The Fiery drivers, utilities, and software found here in the Software Download portal have all been tested and approved by EFI. Eac
-
Senior Tech
250+ Posts
- Rep Power
- 38
Re: Canon C5030 with Fiery W10-01 ImagePass B1
-
Junior Member
- Rep Power
- 0
Re: Canon C5030 with Fiery W10-01 ImagePass B1
-
-
-
Junior Member
- Rep Power
- 0
Re: Canon C5030 with Fiery W10-01 ImagePass B1
Thank you so much.
Now my two machines are again running.
Thanks.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks