Thanks: 
Likes: 
Dislikes: Hi all... I have trouble with Canon advance 6075... After replacing CCD unit ..on service mode the FEEDER Menu wae deseapper..no menu FEEDER...please help..thanks
Hi all... I have trouble with Canon advance 6075... After replacing CCD unit ..on service mode the FEEDER Menu wae deseapper..no menu FEEDER...please help..thanks
Do you try to reset the rcon or the ccd in the service mode?
Sent from my RNE-L22 using Tapatalk
hello good morning because problem or error did you change the ccd?Originally Posted by okimaestro79
CCD unit no eror..not change the CCD..only cleaning scanning lamp and glasseshello good morning because problem or error did you change the ccd?
Why did you replace the CCD?
Does the Document feeder work ok?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
the menu doesnt show because there is something wrong with the reader unit. is there power to the reader unit? doese the light come on when you close the adf lid?
hello when you turn on the printer, does the dadf intermittently emit a mechanism sound or place a paper in the dadf and should the LED that detects the paper turn on?
replace or discard:
- the dadf driver pcb or adf unit (dadf).
- the Reader Controller PCB or reader unit
Please check this item
COPIER > OPTION > FNC-SW > W/SCNR
must be 1
"Knowledge is a source, but unfortunately ignorance is a sea."
Your device may have gone into limited function mode. Will need to calibrate CCD/Scanner. See manual for details.
Reply With Quote
Bookmarks